Researchers have developed a low-cost gel film that can pull water from the air in even dry climates like the desert.
More than a third of the world’s population lives in drylands, areas that experience significant water shortages. Engineers and scientists at The University of Texas at Austin have developed a unique solution that could help people in these areas access clean drinking water.
The researchers developed a low-cost gel film comprised of abundant materials that can pull water from the air in even the driest climates. The materials that facilitate this reaction cost just $2 per kilogram, and a single kilogram can produce more than 6 liters (~1.6 gallons) of water per day in areas with less than 15% relative humidity and 13 liters (~3.4 gallons) in areas with up to 30% relative humidity.
An example of a different shape the water-capturing film can take. Credit: The University of Texas at Austin / Cockrell School of Engineering
The research builds on previous breakthroughs from the research team, including the ability to pull water out of the atmosphere and the application of that technology to create self-watering soil. However, these technologies were designed for relatively high-humidity environments.
“This new work is about practical solutions that people can use to get water in the hottest, driest places on Earth,” said Guihua Yu, professor of materials science and mechanical engineering in the Cockrell School of Engineering’s Walker Department of Mechanical Engineering. “This could allow millions of people without consistent access to drinking water to have simple, water generating devices at home that they can easily operate.”
The new paper was published on May 19, 2022, in the journal Nature Communications.
The water-capturing film can easily be molded into many different shapes. Credit: The University of Texas at Austin / Cockrell School of Engineering
The researchers used renewable cellulose and a common kitchen ingredient, konjac gum, as a main hydrophilic (attracted to water) skeleton. The open-pore structure of gum speeds up the moisture-capturing process. Another designed component, thermo-responsive cellulose with hydrophobic (resistant to water) interaction when heated, helps release the collected water immediately so that overall energy input to produce water is minimized.
Other attempts at pulling water from desert air are typically energy-intensive and do not produce much. And although 6 liters does not sound like much, the researchers say that creating thicker films or absorbent beds or arrays with optimization could drastically increase the amount of water they yield.
The process of creating the water-capturing film from its ingredients. Credit: The University of Texas at Austin/Cockrell School of Engineering
The reaction itself is a simple one, the researchers said, which reduces the challenges of scaling it up and achieving mass usage.
“This is not something you need an advanced degree to use,” said Youhong “Nancy” Guo, the lead author on the paper and a former doctoral student in Yu’s lab, now a postdoctoral researcher at the Massachusetts Institute of Technology. “It’s straightforward enough that anyone can make it at home if they have the materials.”
The film is flexible and can be molded into a variety of shapes and sizes, depending on the need of the user. Making the film requires only the gel precursor, which includes all the relevant ingredients poured into a mold.
A prototype device for capturing water from the air using the new film. Credit: The University of Texas at Austin / Cockrell School of Engineering
“The gel takes 2 minutes to set simply. Then, it just needs to be freeze-dried, and it can be peeled off the mold and used immediately after that,” said Weixin Guan, a doctoral student on Yu’s team and a lead researcher of the work.
Reference: “Scalable super hygroscopic polymer films for sustainable moisture harvesting in arid environments” by Youhong Guo, Weixin Guan, Chuxin Lei, Hengyi Lu, Wen Shi and Guihua Yu, 19 May 2022, Nature Communications.
DOI: 10.1038/s41467-022-30505-2
The research was funded by the U.S. Department of Defense’s Defense Advanced Research Projects Agency (DARPAFormed in 1958 (as ARPA), the Defense Advanced Research Projects Agency (DARPA) is an agency of the United States Department of Defense responsible for the development of emerging technologies for use by the military. DARPA formulates and executes research and development projects to expand the frontiers of technology and science, often beyond immediate U.S. military requirements, by collaborating with academic, industry, and government partners.” data-gt-translate-attributes=”[{“attribute”:”data-cmtooltip”, “format”:”html”}]”>DARPA), and drinking water for soldiers in arid climates is a big part of the project. However, the researchers also envision this as something that people could someday buy at a hardware store and use in their homes because of its simplicity.
Yu directed the project. Guo and Guan co-led experimental efforts on synthesis, characterization of the samples, and device demonstration. Other team members are Chuxin Lei, Hengyi Lu, and Wen Shi.
Source: SciTechDaily
