Press "Enter" to skip to content

PEM fuel cell with novel biomimetic design

Spanish scientists developed a proton exchange membrane fuel cell with a bipolar plate based on a nature-inspired structure. This architecture, according to its creators, shows remarkable performance when operating at high relative humidity values of 90%.

Researchers at the University of Sevilla in Spain have developed a proton exchange membrane fuel cell (PEMFC) with a bipolar plate (BP) based on a nature-inspired structure. According to the scientists, BPs are crucial for optimal water management within the cell, which prevents flooding and improves the cell operation at high current densities. “A properly optimized flow design allows the fuel cell to develop uniform and stable power output and correctly manage spin-off water from the reaction,” they stated.

Through computational fluid dynamics (CFD) models and simulations, the Spanish group investigated several bioinspired flow channel structures such as leaves, lungs, or sponges and sought to assess which of them offer the best performance in terms of reactant distribution, pressure, and velocity fields.

The academics created three different flow channel architectures. The first one, named Design A, is symmetric with respect to the BP diagonal and consists of a branch going along the BP diagonal with ramified secondary branches in a perpendicular direction, which in turn are linked via tertiary perpendicular branches. The second flow channel configuration, called Design B, consists of a double serpentine flow channel with a continuous flow from inlet to outlet and a geometrical symmetry with respect to the main BP diagonal. The Design C architecture is based on an inlet collector and an outlet collector connected in parallel with six groups of straight channels in sets of seven channels each.

The performance of the three architectures was compared to that of a reference design with a parallel-serpentine design of 50 cm2 active area from US-based ElectroChem Inc. “The experimental work was conducted with a PEM fuel cell test station, devoted to the experimental testing of PEM single cells and short stacks up to 500 W,” the researchers said.

Popular content

A slightly modified version of Design C including graphene porous sponge inserts was the architecture with the best performance. It exhibited the most homogeneous velocity flow field, an average velocity of 1.71 m/s), a standard deviation velocity of 2.87 m/s, and a lower pressure drop of 1042.8 Pa.

“Even though lower performance was observed for the biomimetic design in comparison to the parallel-serpentine for lower cell temperatures (4.1% lower), higher cell backpressure (6.2% lower) and higher cathode stoichiometric factor of 3.5 (21.2% lower), the novel biomimetic design showed a better performance when operating at higher relative humidity values of 90%, reaching out a peak power a 6.0% higher, indicating that the proposed novel biomimetic design is particularly suited for improved water management at high reactants humidity,” the academics concluded.

Their findings were presented in the paper Experimental and numerical Investigation on the design of a bioinspired PEM fuel cell, published in Energy.

This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: [email protected]

Source: pv magazine