Press "Enter" to skip to content

Ultra-Efficient Catalyst: Making Biodiesel From Dirty Old Cooking Oil Just Got Way Easier

Sponge-like catalysts could transform biodiesel production and chemical manufacturing. Image shows the porous ceramic sponge fabricated in the study (magnified 20,000 times). Credit: RMIT University

New ultra-efficient catalyst can recycle old cooking oil into biodiesel and turn food scraps into high-value complex molecules.

Researchers have developed a powerful, low-cost method for recycling used cooking oil and agricultural waste into biodiesel, and turning food scraps and plastic rubbish into high-value products.

The method harnesses a new type of ultra-efficient catalyst that can make low-carbon biodiesel and other valuable complex molecules out of diverse, impure raw materials.

Waste cooking oil currently has to go through an energy-intensive cleaning process to be used in biodiesel, because commercial production methods can only handle pure feedstocks with 1-2% contaminants.

The new catalyst is so tough it can make biodiesel from low-grade ingredients, known as feedstock, containing up to 50% contaminants.

It is so efficient it could double the productivity of manufacturing processes for transforming rubbish like food scraps, microplastics, and old tires into high-value chemical precursors used to make anything from medicines and fertilizers to biodegradable packaging.

Sponge-Like Catalyst

A graphic illustration showing how the catalyst performs several chemical reactions in sequence within a single catalyst particle, with molecules entering the sponge through the large pores (macropore) then passing into smaller pores (mesopore). Credit: RMIT University

The catalyst design is reported in a new study from an international collaboration led by RMIT University, published in Nature Catalysis.

Co-lead investigator Professor Adam Lee, RMIT, said that conventional catalyst technologies depended on high purity feedstocks and required expensive engineering solutions to compensate for their poor efficiency.

“The quality of modern life is critically dependent on complex molecules to maintain our health and provide nutritious food, clean water and cheap energy,” Lee said.

“These molecules are currently produced through unsustainable chemical processes that pollute the atmosphere, soil and waterways.

“Our new catalysts can help us get the full value of resources that would ordinarily go to waste — from rancid used cooking oil to rice husks and vegetable peelings — to advance the circular economy.

“And by radically boosting efficiency, they could help us significantly reduce environmental pollution from chemical manufacturing and bring us closer to the green chemistry revolution.”

Catalyst sponge: advancing green chemistry

To make the new ultra-efficient catalyst, the team fabricated a micron-sized ceramic sponge (100 times thinner than a human hair) that is highly porous and contains different specialized active components.

Molecules initially enter the sponge through large pores, where they undergo a first chemical reaction, and then pass into smaller pores where they undergo a second reaction.

It’s the first time a multi-functional catalyst has been developed that can perform several chemical reactions in sequence within a single catalyst particle, and it could be a game changer for the $US34 billion global catalyst market.

Co-lead investigator Professor Karen Wilson, also from RMIT, said the new catalyst design mimicked the way that enzymes in human cells coordinated complex chemical reactions.

“Catalysts have previously been developed that can perform multiple simultaneous reactions, but these approaches offer little control over the chemistry and tend to be inefficient and unpredictable,” Wilson said.

“Our bio-inspired approach looks to nature’s catalysts — enzymes — to develop a powerful and precise way of performing multiple reactions in a set sequence.

“It’s like having a nanoscale production line for chemical reactions — all housed in one, tiny and super-efficient catalyst particle.”

DIY diesel: supporting distributed biofuel production

The sponge-like catalysts are cheap to manufacture, using no precious metals.

Making low-carbon biodiesel from agricultural waste with these catalysts requires little more than a large container, some gentle heating and stirring.

It’s a low-technology, low-cost approach that could advance distributed biofuel production and reduce reliance on fossil fuel-derived diesel.

“This is particularly important in developing countries where diesel is the primary fuel for powering household electricity generators,” Wilson said.

“If we could empower farmers to produce biodiesel directly from agricultural waste like rice bran, cashew nut and castor seed shells, on their own land, this would help address the critical issues of energy poverty and carbon emissions.”

While the new catalysts can be used immediately for biodiesel production, with further development they could be easily tailored to produce jet fuel from agricultural and forestry waste, old rubber tires, and even algae.

The next steps for the RMIT School of Science research team are scaling up the catalyst fabrication from grams to kilograms and adopting 3D printing technologies to accelerate commercialization.

“We’re also hoping to expand the range of chemical reactions to include light and electrical activation for cutting-edge technologies like artificial photosynthesis and fuel cells,” Lee said.

“And we’re looking to work with potential business partners to create a range of commercially available catalysts for different applications.”

Reference: “A spatially orthogonal hierarchically porous acid–base catalyst for cascade and antagonistic reactions” by Mark A. Isaacs, Christopher M. A. Parlett, Neil Robinson, Lee J. Durndell, Jinesh C. Manayil, Simon K. Beaumont, Shan Jiang, Nicole S. Hondow, Alexander C. Lamb, Deshetti Jampaiah, Michael L. Johns, Karen Wilson and Adam F. Lee, 26 October 2020, Nature Catalysis.
DOI: 10.1038/s41929-020-00526-5

The research was supported through funding from the Australian Research Council (Discovery, Linkage, Industrial Transformation Training Centres).

This research was performed by collaborators from University College London, University of Manchester, University of Western Australia, University of Plymouth, Aston University, Durham University and University of Leeds.

Source: SciTechDaily